Main Products
- Phosphonates Antiscalants, Corrosion
Inhibitors and Chelating Agents - Salts of Phosphonates
-
- Tetra Sodium Salt of 1-Hydroxy Ethylidene-1,1-Diphosphonic Acid (HEDP•Na4)
- Tetra Sodium Salt of 1-Hydroxy Ethylidene-1,1-Diphosphonic Acid (HEDP•Na4)
- 2-Phosphonobutane -1,2,4-Tricarboxylic Acid, Sodium salt (PBTC•Na4)
- Penta sodium salt of Amino Trimethylene Phosphonic Acid (ATMP•Na5)
- Hepta sodium salt of Diethylene Triamine Penta (Methylene Phosphonic Acid) (DTPMP•Na7)
- Potassium Salt of HexaMethylene-DiamineTetra (MethylenePhosphonic Acid) HMDTMPA•K6
- More
- Polycarboxylic antiscalant and dispersant
- Biodegradable antiscalant and dispersant
- Biocide and Algicide
- Built Scale & Corrosion Inhibitors and Pretreatment Filming Agents
-
- TH-907 Non-P Scale&Corrosion Inhibitor
- TH-503 Scale and Corrosion Inhibitor for Boiler
- TH-503B Scale and Corrosion Inhibitor for Boiler
- TH-504 Scale and Corrosion Inhibitor for Heating Water
- TH-601 Scale and Corrosion Inhibitor for Iron & Steel Plant
- TH-604 Scale and Corrosion Inhibitor for Power Plant
- More
- Corrosion Inhibitor
- Oxygen Scavenger
- Reverse Osmosis Chemicals
- Other
Shandong Taihe Technologies Co., Ltd.
TEL: +86-632-5113066
FAX: +86-632-5112055
E-mail: info@thwater.net
ADD: No.1, Shiliquan East Road, Shizhong District, Zaozhuang City, Shandong Province, P.R.China
TH-150 RO Antiscalant And Dispersant
Properties:
TH-150 is a high-effective scale inhibitor, it is suitable for reverse osmose (RO), nanofiltration (NF) and ultrafiltration (UF) system. TH-150 can inhibit the scale deposit on membrane surface, improve water quality, lower operation expanse. TH-150 has the following properties:
1. Used together with organic flocculants.
2. Used for drinking water system.
3. Inhibit scales formation of calcium carbonate, calcium sulfate, barium sulfate and strontrium sulfate, no scale is formed even when LSI value is 3.0.
4. Used for almost all RO membranes.
5. Maintain the surface of RO membrane clean by dispersing particle blockage.
6. Effective in pH 5-9.
7. Used directly, or after dilution.
8. Good resistance to aluminia oxide and ferric oxide.
Specification:
Items | Index |
---|---|
Appearance | Amber transparent liquid |
pH (1% water solution) | 2.0±1.0 |
Density (20℃)g/cm3 | 1.10 min |
Package and Storage:
200L plastic drum,IBC(1000L),customers’ requirement.
Usage Method:
For best effective, TH-150 should be added before static mixer or cylindric filter, the dosage of 3-6mg/L is expected, it can be diluted by RO liquid or by deionized water.
Notes: extra or insufficient dosage will do harm to the RO membrane.